Description:
Active Gold Strip Wax
Glows like gold! Contains the soothing benefits of Chamomile and the finest grade of gold Micro Mica, for gentle and efficient waxing.
How To Use:
- To heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance. 800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.
- Before use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.
- Cleanse skin with Lycotane Skin Cleanser and allow skin to dry.
- With spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.
- To remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.
- Hold skin taut and pull waxing strip off quickly against hair growth.
- Re-apply and remove wax as necessary until all hair has been removed.
- To finish, apply Lycotane Skin Cleanser to cleanse skin and to close hair follicles.
- Apply Tea-Tree Perfect to soothe, protect and moisturise, as well as remove any possible sticky wax residue.
- Use Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.
Warning: Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.
Key Ingredients
- Chamomile
- Micro Mica
Aloe Vera Strip Wax
The beneficial properties of soothing and cooling Aloe Vera leaves skin silky-smooth and comfortable.
How To Use:
- To heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance. 800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.
- Before use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.
- Cleanse skin with Lycotane Skin Cleanser and allow skin to dry.
- With spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.
- To remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.
- Hold skin taut and pull waxing strip off quickly against hair growth.
- Re-apply and remove wax as necessary until all hair has been removed.
- To finish, apply Lycotane Skin Cleanser to cleanse skin and to close hair follicles.
- Apply Tea-Tree Perfect to soothe, protect and moisturise, as well as remove any possible sticky wax residue.
- Use Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.
Warning: Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.
Key Ingredients
- Aloe Vera
Apricot Strip Wax
The LYCON original. This famous wax is ultra gentle and super strong. Conditions and nurtures skin while waxing.
How To Use:
- To heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance. 800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.
- Before use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.
- Cleanse skin with Lycotane Skin Cleanser and allow skin to dry.
- With spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.
- To remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.
- Hold skin taut and pull waxing strip off quickly against hair growth.
- Re-apply and remove wax as necessary until all hair has been removed.
- To finish, apply Lycotane Skin Cleanser to cleanse skin and to close hair follicles.
- Apply Tea-Tree Perfect to soothe, protect and moisturise, as well as remove any possible sticky wax residue.
- Use Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.
Warning: Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.
Key Ingredients
- Apricot Kernel Oil
- Chamomile
Azulene Strip Wax
Extra gentle wax with soothing properties from Azulene, a calming extract derived from the Chamomile plant.
How To Use:
- To heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance. 800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.
- Before use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.
- Cleanse skin with Lycotane Skin Cleanser and allow skin to dry.
- With spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.
- To remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.
- Hold skin taut and pull waxing strip off quickly against hair growth.
- Re-apply and remove wax as necessary until all hair has been removed.
- To finish, apply Lycotane Skin Cleanser to cleanse skin and to close hair follicles.
- Apply Tea-Tree Perfect to soothe, protect and moisturise, as well as remove any possible sticky wax residue.
- Use Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.
Warning: Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.
Key Ingredients
- Chamomile
Lycoflex Vanilla Strip Wax
Super creamy and flexible for an amazing gentle feel, with a delightful vanilla scent. Excellent for all sensitive areas.
How To Use:
- To heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance. 800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.
- Before use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.
- Cleanse skin with Lycotane Skin Cleanser and allow skin to dry.
- With spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.
- To remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.
- Hold skin taut and pull waxing strip off quickly against hair growth.
- Re-apply and remove wax as necessary until all hair has been removed.
- To finish, apply Lycotane Skin Cleanser to cleanse skin and to close hair follicles.
- Apply Tea-Tree Perfect to soothe, protect and moisturise, as well as remove any possible sticky wax residue.
- Use Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.
Warning: Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.
Key Ingredients
- Titanium Dioxide
- Vanilla Extract
Lycotec Superberry Strip Wax
New generation, high-tech, ultra-flexible and creamy pink, berry scented strip wax that creates a super gentle, smooth wax.
How To Use:
- To heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance. 800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.
- Before use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.
- Cleanse skin with Lycotane Skin Cleanser and allow skin to dry.
- With spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.
- To remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.
- Hold skin taut and pull waxing strip off quickly against hair growth.
- Re-apply and remove wax as necessary until all hair has been removed.
- To finish, apply Lycotane Skin Cleanser to cleanse skin and to close hair follicles.
- Apply Tea-Tree Perfect to soothe, protect and moisturise, as well as remove any possible sticky wax residue.
- Use Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.
Warning: Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.
Key Ingredients
- Titanium Dioxide
- Micro Mica
- Strawberry Seed Oil
Lycotec White Strip Wax
New generation, high-tech, ultra-flexible and strong white strip wax that creates a super gentle, smooth wax.
How To Use:
- To heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance. 800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.
- Before use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.
- Cleanse skin with Lycotane Skin Cleanser and allow skin to dry.
- With spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.
- To remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.
- Hold skin taut and pull waxing strip off quickly against hair growth.
- Re-apply and remove wax as necessary until all hair has been removed.
- To finish, apply Lycotane Skin Cleanser to cleanse skin and to close hair follicles.
- Apply Tea-Tree Perfect to soothe, protect and moisturise, as well as remove any possible sticky wax residue.
- Use Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.
Warning: Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.
Key Ingredients
- Titanium Dioxide
- Coconut Oil
- Vanilla
Manifico Strip Wax
A sparkling non-sticky formula, with Chamomile, Australian Sandalwood and Micro Mica. MANifico Strip Wax is excellent for sensitive skin and strong male hair growth. This gentle formula removes hairs as short as 2mm and can be used thinly and efficiently without skin drag on the legs, chest, backs and arms.
How To Use:
- To heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance. 800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.
- Before use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.
- Cleanse skin with MANifico Skin Cleanser and allow skin to dry.
- With spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.
- To remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.
- Hold skin taut and pull waxing strip off quickly against hair growth.
- Re-apply and remove wax as necessary until all hair has been removed.
- To finish, apply MANifico Skin Cleanser to cleanse skin and to close hair follicles.
- Apply MANifico Double Action Oil to soothe, protect and moisturise, as well as remove any possible sticky wax residue.
- Use Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.
Warning: Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.
Key Ingredients
- Micro Mica
- Sweet Almond Oil
- Titanium Dioxide
Olive Oil Strip Wax
This special blend of soothing Virgin Olive Oil and Sweet Almond Oil effectively grips the shortest and most stubborn hairs.
How To Use:
- To heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance. 800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.
- Before use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.
- Cleanse skin with Lycotane Skin Cleanser and allow skin to dry.
- With spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.
- To remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.
- Hold skin taut and pull waxing strip off quickly against hair growth.
- Re-apply and remove wax as necessary until all hair has been removed.
- To finish, apply Lycotane Skin Cleanser to cleanse skin and to close hair follicles.
- Apply Tea-Tree Perfect to soothe, protect and moisturise, as well as remove any possible sticky wax residue.
- Use Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.
Warning: Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.
Key Ingredients
- Olive Oil
- Sweet Almond Oil
Rosette Strip Wax
A LYCON legend! This creamy pink classic is exceptional for extra sensitive areas.
How To Use:
- To heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance. 800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.
- Before use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.
- Cleanse skin with Lycotane Skin Cleanser and allow skin to dry.
- With spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.
- To remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.
- Hold skin taut and pull waxing strip off quickly against hair growth.
- Re-apply and remove wax as necessary until all hair has been removed.
- To finish, apply Lycotane Skin Cleanser to cleanse skin and to close hair follicles.
- Apply Tea-Tree Perfect to soothe, protect and moisturise, as well as remove any possible sticky wax residue.
- Use Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.
Warning: Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.
Key Ingredients
- Rose
- Chamomile
- Titanium Dioxide
Soyummy Strip Wax
A chocolate treat without the calories! Super gentle and decadent with a chocolate scent.
How To Use:
- To heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance. 800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.
- Before use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.
- Cleanse skin with Lycotane Skin Cleanser and allow skin to dry.
- With spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.
- To remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.
- Hold skin taut and pull waxing strip off quickly against hair growth.
- Re-apply and remove wax as necessary until all hair has been removed.
- To finish, apply Lycotane Skin Cleanser to cleanse skin and to close hair follicles.
- Apply Tea-Tree Perfect to soothe, protect and moisturise, as well as remove any possible sticky wax residue.
- Use Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.
Warning: Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.
Key Ingredients
- Iron Oxide
- Micro Mica
Soberry Delicious Strip Wax
Smells good enough to eat! Formulated with a delicious strawberry scent. Sparkling pink Micro Mica ensures skin is protected while waxing and no skin drag.
How To Use:
- To heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance. 800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.
- Before use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.
- Cleanse skin with Lycotane Skin Cleanser and allow skin to dry.
- With spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.
- To remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.
- Hold skin taut and pull waxing strip off quickly against hair growth.
- Re-apply and remove wax as necessary until all hair has been removed.
- To finish, apply Lycotane Skin Cleanser to cleanse skin and to close hair follicles.
- Apply Tea-Tree Perfect to soothe, protect and moisturise, as well as remove any possible sticky wax residue.
- Use Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.
Warning: Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.
Key Ingredients
- Micro Mica
- Sweet Almond Oil
- Titanium Dioxide
Wax ‘N’ Relax Strip Wax
- Economical and effective.
How To use:
- To heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance. 800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.
- Before use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.
- Cleanse skin with Lycotane Skin Cleanser and allow skin to dry.
- With spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.
- To remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.
- Hold skin taut and pull waxing strip off quickly against hair growth.
- Re-apply and remove wax as necessary until all hair has been removed.
- To finish, apply Lycotane Skin Cleanser to cleanse skin and to close hair follicles.
- Apply Tea-Tree Perfect to soothe, protect and moisturise, as well as remove any possible sticky wax residue.
- Use Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.
Warning: Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.
Key Ingredients
- Sweet Almond Oil
| Color | Active Gold, Aloe Vera, Apricot, Azulene, Lycoflex Vanilla, Lycotec Superberry, Lycotec White, Manifico, Olive Oil, Rosette, Soyummy, Soberry Delicious, Wax 'N' Relax, Nuwoman |
|---|---|
| Size | 800ml, 1L |
Quick Shipping and Professional Packaging
Thanks to our longstanding association with UPS FedEx DHL and other top international carriers, we are able to provide a range of shipping options. Our warehouse staff is highly skilled and will package your items according to our precise and precise specifications. Before shipping the goods are carefully inspected and secured. We ship to thousands clients every day from all over the world. This is a sign of our determination to become the biggest online retailer on earth. These warehouses are situated in Europe just as they are in the USA.
Note: Orders containing more than one product will be assigned a distinct processing time, depending on the specific product.
We will thoroughly inspect all products before they are shipped. Most orders are now shipped within 48 hours. The expected delivery time is between 3 and 7 days.
Returns
Due to multiple parties, including the factory and the warehouse, we're unable to completely manage our stock. Stocks are subject to change at any moment. Be aware that your order will run out of stocks after you place the order.
The policy is 30 days. If the 30 days have elapsed since you purchased your product, we are unable to provide a refund or exchange.
Your item must be in its original packaging and in good condition. It must also not be used. You must have the item in the original packaging.
Related products
After Wax Body Lotion
Body Lotion
York Amber Strip Wax
Baby Face Waxing Kit
Traditional Hot Waxes
Cartridge Heater
Orchid Strip Wax
Pre & Post Wax Oil
Skin Care
Supreme Wax
Moisturizer
G-String
Precision Tool Kit
After Wax Lotions
Wattle Beads
Foaming Gel
Epilace
Heath Beads
Blackbean Beads
Waratah Beads
Hybrid Hot Wax
After Wax Body Lotion
Wattle Strip Wax
After Wax Body Lotion
Protection Rings
Moisturizer
Gel-Crème Serum